how to maintain the sleeve label shrink machine?
Views : 1435
Update time : 2026-02-03 13:45:48
The sleeve label shrink machine is a fully automatic sleeve label machine connected with a shrink tunnel for production, and it is a relatively common machine in the market. To extend the service life of the machine, basic maintenance is a very important step. So, how to maintain and service the sleeve label shrink machine?
1. Clean the mechanical parts with a cleaner (alcohol) and a clean cloth on a daily basis. You can also use a compressed air gun to blow them clean.
2. Before turning on the machine every day, check if there are any foreign objects on the rewinder and if the screws of each part are loose.
3. When the sleeve label machine is releasing the film, the film must be aligned with the center column. At the same time, adjust the position of the photoelectric eye beside it to ensure that the film can be pulled normally.
4. The connection between the sleeve label machine and the shrink tunnel should also be ensured to be smooth and seamless. It is necessary to guarantee the continuous operation of the sleeve label machine and the quality of each set of fixtures being labeled.
5. The temperature of the electric heating shrink tunnel mechanism should be adjusted to the point where the film can be shrunk without wrinkles. The temperature should be determined based on the material of the film.
6. During holidays or when the equipment is not in use, it is necessary to clean the equipment, remove oil stains, perform lubrication maintenance, and cover it with a machine cover to avoid long-term exposure to dust.
Working principle of fully automatic capping machine
What is bottle capping machine?
2026 spring festival holiday notice
Application of automatic label sealing and shrinking machine
